Sliding Gate Wheel/Rollers for U Groove 90mm Internal - Double Bearing

Heavy Duty Sliding gate component wheel or rollers U groove 90mm Dia internal - Double bearing

Double Bearing support Max capacity weight 280 kg per wheel

Material : Steel Wheel

Finished: Zinc plate

Tigerlink Hardware is Sliding Gate Automation Kits and Accessories supplier. We have full range of Sliding gate hardware

Wheels & Castors. High Quality Products. Very Competitive Prices. Over 20 Years Experience. freindly Staff.

looking inside at a wheel

Stronger and Heavyduty wheels.

Zinc - Finished

In Most cases 2 wheels are enough for Sliding gates upto 5M, if you want to add any extra wheels 2 at each end 200-300mm aparts would be better then adding a third wheel in the middle. A middle wheel would take all the weight if there is any rises in the floor track and would shorten the life of that wheel.   2 wheels or 4 wheels is the right way to do this. 

How to Tip : 

Cut a slot 70mm x 34mm drill a hole in each corner then cut a straight line then tek screw the wheel in place  
Hint - cut these wheels in  400 - 600mm in from each end

Step by Step 

1. How to join Floor Track 

2. Installing the Gate Wheel

3. Double and Single Bearing Wheels

Shipping Weight 1.1000kg
Shipping Width 0.150m
Shipping Height 0.090m
Shipping Length 0.035m
Shipping Cubic 0.000472000m3
Unit Of Measure ea