The WH482 Sliding Gate Wheel is a high-quality, Italian-made wheel designed for smooth and reliable operation of sliding gates. With a V-groove design and a diameter of 90mm, this wheel ensures proper gate alignment and reduces friction during movement. The double bearing construction further enhances the wheel's performance and durability. Whether for residential or commercial applications, the WH482 Sliding Gate Wheel provides exceptional functionality and long-lasting performance.

Installing a sliding gate wheel involves a few key steps to ensure the gate operates smoothly. Here’s a step-by-step guide to help you install it:

Materials Needed:

• Sliding gate wheel 
• Measuring tape
• Cutting machine
• Drill and drill bits
• Screws and bolts 
• Wrench or screwdriver

Steps for Installation:

Prepare the Gate and Track:

• Before installing the wheels, ensure that your sliding gate is already installed and that the sliding track is properly laid out.
• The track should be level and secure to ensure smooth operation.

Step One:
Measure the sliding gate wheel cradle, ensuring there's enough space to attach the wheel to the steel frame. Use a cutting wheel to make the cut, but first, drill four holes (one in each corner) using an 8-10mm drill bit. This will ensure the square hole is clean in each corner.

Step Two:
Clean up the rectangular hole with a file to ensure smooth edges, then spray the area with galvanized paint for protection.

Step Three:
Place the sliding gate wheel into the cut-out and check that it can rotate freely. Ensure there’s enough space for securing the wheel with a tek screw.

Step Four:
When screwing in the tek screws, make sure the wheel is aligned with the edge of the steel. The last thing you want is for the wheel to be out of alignment. Avoid welding the wheel if possible, as this can make replacement more difficult later on.

The WH393 Sliding Gate Wheel with U-Groove is designed to provide smooth and reliable operation for your sliding gate system. With its 90mm external diameter and U-groove design, this wheel ensures optimal traction and stability. The double-bearing system enhances the wheel's load-bearing capacity and reduces friction, resulting in effortless gate movement. Crafted from high-quality materials, this wheel is built to withstand heavy-duty use and resist wear and tear. Upgrade your sliding gate system with the WH393 Sliding Gate Wheel for improved performance and longevity.

Hold weight up to 190kg

Installing a sliding gate wheel involves a few key steps to ensure the gate operates smoothly. Here’s a step-by-step guide to help you install it:

Materials Needed:

• Sliding gate wheel 
• Measuring tape
• Drill and drill bits
• Screws and bolts 
• Wrench or screwdriver

Steps for Installation:

1. Prepare the Gate and Track:
   • Before installing the wheels, ensure that your sliding gate is already installed and that the sliding track is properly laid out.
   • The track should be level and secure to ensure smooth operation.
2. Determine the Wheel Placement:
   • Decide where the wheel brackets will go on the gate. Typically, the wheels should be placed at the bottom of the gate. Depending on the gate size.
   • The wheel’s placement is important for proper weight distribution and gate stability.
3. Mark the Drill Holes:
   • Hold the wheel brackets against the gate at the desired position.
   • Use a measuring tape to ensure the placement is even and at the correct height.
   • Mark the holes where the screws or bolts will go to secure the wheels.
4. Drill the Holes:
   • Drill holes at the marked points on the gate, making sure the holes are large enough for the screws or bolts provided in your wheel kit.
   • If you’re installing a single wheel, the hole placement should be centered along the gate's width.
5. Attach the Wheel Bracket:
   • Secure the wheel bracket to the gate using the screws or bolts.
   • Tighten them properly to ensure the bracket is secure. Be sure the wheel can rotate freely once attached.
6. Install the Wheel:
   • If the wheel is separate from the bracket, slide the wheel into its bracket or mounting system.
   • Tighten any screws or bolts holding the wheel in place, ensuring it rotates easily and is properly aligned.
7. Test the Gate:
   • Test the sliding gate by moving it along the track.
   • Check that the wheels glide smoothly without any obstruction or resistance. The gate should be stable and move freely.
8. Adjust if Necessary:
   • If the gate isn’t sliding smoothly, check the alignment of the wheels and track. You might need to adjust the wheel height or ensure that the track is level.
   • Make sure the wheels are aligned with the gate and track to avoid any friction.

Try not to weld them onto the sliding gate frame it will be a nightmare to replace them later

The WH369 Sliding Gate Wheel is designed to provide smooth and reliable operation for your sliding gate. With its U-groove design and 60mm external diameter, this wheel offers excellent stability and support. The double-bearing system ensures smooth and effortless movement, reducing friction and wear. Upgrade your sliding gate with the WH369 Sliding Gate Wheel for enhanced performance and convenience.

Hold weight up to 170kg

Installing a sliding gate wheel involves a few key steps to ensure the gate operates smoothly. Here’s a step-by-step guide to help you install it:

Materials Needed:

• Sliding gate wheel 
• Measuring tape
• Drill and drill bits
• Screws and bolts 
• Wrench or screwdriver

Steps for Installation:

1. Prepare the Gate and Track:
   • Before installing the wheels, ensure that your sliding gate is already installed and that the sliding track is properly laid out.
   • The track should be level and secure to ensure smooth operation.
2. Determine the Wheel Placement:
   • Decide where the wheel brackets will go on the gate. Typically, the wheels should be placed at the bottom of the gate. Depending on the gate size.
   • The wheel’s placement is important for proper weight distribution and gate stability.
3. Mark the Drill Holes:
   • Hold the wheel brackets against the gate at the desired position.
   • Use a measuring tape to ensure the placement is even and at the correct height.
   • Mark the holes where the screws or bolts will go to secure the wheels.
4. Drill the Holes:
   • Drill holes at the marked points on the gate, making sure the holes are large enough for the screws or bolts provided in your wheel kit.
   • If you’re installing a single wheel, the hole placement should be centered along the gate's width.
5. Attach the Wheel Bracket:
   • Secure the wheel bracket to the gate using the screws or bolts.
   • Tighten them properly to ensure the bracket is secure. Be sure the wheel can rotate freely once attached.
6. Install the Wheel:
   • If the wheel is separate from the bracket, slide the wheel into its bracket or mounting system.
   • Tighten any screws or bolts holding the wheel in place, ensuring it rotates easily and is properly aligned.
7. Test the Gate:
   • Test the sliding gate by moving it along the track.
   • Check that the wheels glide smoothly without any obstruction or resistance. The gate should be stable and move freely.
8. Adjust if Necessary:
   • If the gate isn’t sliding smoothly, check the alignment of the wheels and track. You might need to adjust the wheel height or ensure that the track is level.
   • Make sure the wheels are aligned with the gate and track to avoid any friction.

Try not to weld them onto the sliding gate frame it will be a nightmare to replace them later

The WH398 Sliding Gate Wheel with U-Groove is the perfect solution for smooth and effortless sliding gate operation. With its 100mm external diameter and U-groove design, this wheel provides exceptional traction and stability. The double-bearing system ensures optimal load-bearing capacity and reduces friction, resulting in seamless gate movement. Crafted from high-quality materials, this wheel is built to withstand heavy-duty use and resist wear and tear. Upgrade your sliding gate system with the WH398 Sliding Gate Wheel for reliable performance and durability.

Hold weights up to 350kg

Installing a sliding gate wheel involves a few key steps to ensure the gate operates smoothly. Here’s a step-by-step guide to help you install it:

Materials Needed:

• Sliding gate wheel 
• Measuring tape
• Drill and drill bits
• Screws and bolts 
• Wrench or screwdriver

Steps for Installation:

1. Prepare the Gate and Track:
   • Before installing the wheels, ensure that your sliding gate is already installed and that the sliding track is properly laid out.
   • The track should be level and secure to ensure smooth operation.
2. Determine the Wheel Placement:
   • Decide where the wheel brackets will go on the gate. Typically, the wheels should be placed at the bottom of the gate. Depending on the gate size.
   • The wheel’s placement is important for proper weight distribution and gate stability.
3. Mark the Drill Holes:
   • Hold the wheel brackets against the gate at the desired position.
   • Use a measuring tape to ensure the placement is even and at the correct height.
   • Mark the holes where the screws or bolts will go to secure the wheels.
4. Drill the Holes:
   • Drill holes at the marked points on the gate, making sure the holes are large enough for the screws or bolts provided in your wheel kit.
   • If you’re installing a single wheel, the hole placement should be centered along the gate's width.
5. Attach the Wheel Bracket:
   • Secure the wheel bracket to the gate using the screws or bolts.
   • Tighten them properly to ensure the bracket is secure. Be sure the wheel can rotate freely once attached.
6. Install the Wheel:
   • If the wheel is separate from the bracket, slide the wheel into its bracket or mounting system.
   • Tighten any screws or bolts holding the wheel in place, ensuring it rotates easily and is properly aligned.
7. Test the Gate:
   • Test the sliding gate by moving it along the track.
   • Check that the wheels glide smoothly without any obstruction or resistance. The gate should be stable and move freely.
8. Adjust if Necessary:
   • If the gate isn’t sliding smoothly, check the alignment of the wheels and track. You might need to adjust the wheel height or ensure that the track is level.
   • Make sure the wheels are aligned with the gate and track to avoid any friction.

Try not to weld them onto the sliding gate frame it will be a nightmare to replace them later

The SGSB429 Sliding Gate Holder is designed for 40mm gates, offering a reliable and convenient solution for sliding gate systems. With a welded cap, this gate holder provides added durability and strength. The holder ensures smooth operation and precise alignment, allowing for easy opening and closing of your gate. Upgrade your gate system with the SGSB429 Sliding Gate Holder to enhance functionality and ensure secure gate operation.

The SGSB399 Sliding Gate Holder is designed to provide secure and convenient support for sliding gates. It features a 40mm holder with a welded cap and rubber stop, ensuring smooth and controlled gate movement. The sliding gate holder is made from durable materials to withstand outdoor conditions and offers reliable performance. With its practical design and added features, the SGSB399 Sliding Gate Holder is an excellent choice for your sliding gate system.

The SGSB439 Sliding Gate Holder is specifically designed for 100mm gates, offering reliable and smooth operation for sliding gate systems. Featuring a welded cap, this gate holder provides added strength and durability, ensuring long-lasting performance. It is made from high-quality materials to withstand outdoor conditions and offers easy installation for convenient gate maintenance. Upgrade your sliding gate system with the SGSB439 Sliding Gate Holder for enhanced functionality and improved gate control.

The WH384 Sliding Gate External Wheel Rollers are designed to provide smooth and reliable operation for your sliding gate. These rollers feature a white nylon wheel with a 90mm diameter, which reduces friction and ensures quiet movement. The wheel rollers are mounted on a sturdy stainless steel bracket, offering durability and resistance to corrosion. With their U-groove design, these rollers are suitable for various types of sliding gates. Whether it's for residential or commercial applications, these external wheel rollers deliver excellent performance and ease of use.

Hold weight up to 100kg

Installing a sliding gate wheel involves a few key steps to ensure the gate operates smoothly. Here’s a step-by-step guide to help you install it:

Materials Needed:

• Sliding gate wheel 
• Measuring tape
• Drill and drill bits
• Screws and bolts 
• Wrench or screwdriver

Steps for Installation:

1. Prepare the Gate and Track:
   • Before installing the wheels, ensure that your sliding gate is already installed and that the sliding track is properly laid out.
   • The track should be level and secure to ensure smooth operation.
2. Determine the Wheel Placement:
   • Decide where the wheel brackets will go on the gate. Typically, the wheels should be placed at the bottom of the gate. Depending on the gate size.
   • The wheel’s placement is important for proper weight distribution and gate stability.
3. Mark the Drill Holes:
   • Hold the wheel brackets against the gate at the desired position.
   • Use a measuring tape to ensure the placement is even and at the correct height.
   • Mark the holes where the screws or bolts will go to secure the wheels.
4. Drill the Holes:
   • Drill holes at the marked points on the gate, making sure the holes are large enough for the screws or bolts provided in your wheel kit.
   • If you’re installing a single wheel, the hole placement should be centered along the gate's width.
5. Attach the Wheel Bracket:
   • Secure the wheel bracket to the gate using the screws or bolts.
   • Tighten them properly to ensure the bracket is secure. Be sure the wheel can rotate freely once attached.
6. Install the Wheel:
   • If the wheel is separate from the bracket, slide the wheel into its bracket or mounting system.
   • Tighten any screws or bolts holding the wheel in place, ensuring it rotates easily and is properly aligned.
7. Test the Gate:
   • Test the sliding gate by moving it along the track.
   • Check that the wheels glide smoothly without any obstruction or resistance. The gate should be stable and move freely.
8. Adjust if Necessary:
   • If the gate isn’t sliding smoothly, check the alignment of the wheels and track. You might need to adjust the wheel height or ensure that the track is level.
   • Make sure the wheels are aligned with the gate and track to avoid any friction.

Try not to weld them onto the sliding gate frame it will be a nightmare to replace them later

The Single Self-Closing Hinge is a high-quality hinge specifically designed for gates, made from durable stainless steel 316 marine-grade material. This ensures excellent corrosion resistance and long-lasting performance, even in harsh outdoor environments. The hinge features a self-closing mechanism, allowing the gate to close automatically once it's opened, providing convenience and enhanced security. With its sleek and sturdy design, the hinge offers reliable functionality and a professional look. It is suitable for a wide range of gate applications, including residential and commercial settings.

The Self-Closing Stainless Steel Interleaf Hinge is a high-quality hinge designed for various gate applications. Made from stainless steel, it offers exceptional durability and corrosion resistance, making it suitable for outdoor use. The hinge features a single-action design, allowing the gate to swing smoothly in one direction. With its self-closing feature, the gate automatically closes after being opened, ensuring convenience and security. The interleaf design provides added stability and strength to the hinge. Whether for residential or commercial gates, the hinge is a reliable choice.

2 Hinges - 40 Kgs
3 Hinges - 60 Kgs

The Safety Cap is designed specifically for the Safetech Heavy Duty Self-Closing Hinge, providing an additional layer of safety and protection. This safety cap is an essential accessory for gates and doors that utilize the Safetech hinge system, ensuring enhanced safety and minimizing the risk of accidents.

With its innovative design, the Safety Cap effectively covers the exposed hinge area, preventing fingers, hands, or other objects from getting caught or pinched in the moving parts. It acts as a protective barrier, offering peace of mind and reducing the potential for injuries.

The GSRB945 Rubber Gate Stop is a versatile and reliable gate accessory designed to provide a secure stopping point for gates. This gate stop features a rubber construction with a height of 94mm, offering excellent impact absorption and gate swing prevention. It is suitable for various gate types, including swing gates and sliding gates. The rubber material ensures durability and long-lasting performance, making it ideal for residential and commercial gate applications. Enhance the safety and functionality of your gate with the GSRB945 Rubber Gate Stop.

The GSRB947 Rubber Gate Stop is a reliable and durable gate accessory designed to provide a secure stopping point for gates. With a height of 120mm, this gate stop offers excellent impact absorption and prevents gate swing. It features a rubber construction that ensures long-lasting performance and is suitable for various gate types, including swing gates and sliding gates. The GSRB947 Rubber Gate Stop enhances the safety and functionality of your gate, making it an essential addition to your gate system.

The Roseville Aluminium Capital is a beautiful architectural accent that adds a touch of elegance and refinement to columns and pillars. Crafted from premium-grade aluminum, this capital showcases intricate floral motifs and exquisite craftsmanship, making it a standout feature in any architectural design. With its classic and timeless design, the Roseville Aluminium Capital is a versatile choice that complements various styles, from traditional to contemporary. Its durable construction ensures long-lasting beauty and functionality, making it suitable for both indoor and outdoor applications. Enhance the aesthetic appeal of your space with the Roseville Aluminium Capital and create a captivating focal point that exudes sophistication.